Dan John Men's Basic Crew Neck Short Sleeve T-Shirt

Measure close to the body with a fabric tape measure or use a similar style garment to ensure the most accurate measurements. Due to design and production diversity, dimensions and fits may vary.

Waist

Measure garment straight across along top edge with front and back aligned. Double measurement.

Chest

Measure garment flat, straight across from armpit to armpit, or one inch below armhole. Double measurement.

Neck

Measure with the collar fully open or from end to end, along the seam, across the front (from one side to another).

Shoulder Width

Measure back of garment straight across shoulder seam to seam or edge to edge.

Back Length

Measure back of garment from the center-back neck seam (or top edge) straight down to bottom of garment.

Sleeve Length

Measure from center-back neck along shoulder of garment to armhole seam, pivot at shoulder/armhole and continue along center of sleeve to sleeve edge. (If no shoulder seam, measure straight to sleeve edge.)

Bottom Opening

Measure bottom opening, straight across from one edge to the other then double the measurement. For curved hemline, measure along edge of garment.